$60.12
$96.19
SKU: AT-LPW50PB Categories: 'Pricespy, Audio, Turntables Description Additional informationDescription The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.Stunning Look, Stunning SoundMarked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.Carbon-Fiber TonearmDesigned for a Higher Level of ListeningThe AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½”-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.Cartridge Assembly Line Circa 1962Over 55 Years of Analog ExcellenceWe got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPMMotor features a speed-sensor system to maintain accurate platter rotation speedAdjustable dynamic anti-skate controlProfessional anti-resonance, die-cast aluminum platter with rubber matAT-HS4 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylusAT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and applicationStraight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable restAnti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finishHigh-isolation, height-adjustable feetBuilt-in switchable phono preamplifier for phono or line-level outputAC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chainIncludes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust coverTurntableTypeBelt-drive manual turntableMotorDC servo with Active Speed StabilizationDrive MethodBelt driveSpeeds33-1/3 RPM, 45 RPMTurntable PlatterDie-cast aluminumWow and Flutter< 0.15% WRMS (33 RPM) at 3 kHzSignal-to-Noise Ratio>60dBOutput LevelPre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/secPhono Pre-Amp Gain35 dB nominal, RIAA equalizedPower Supply Requirements100-240 V, 50/60 Hz, 0.5 A Max.DimensionsWith dustcover: 420.0 mm (16.54″) W x 356.0 mm (14.02″) D x 126.0 mm (4.96″) H Without dustcover and hinges: 420.0 mm (16.54″) W x 356.0 mm (14.02″) D x 114.0 mm (4.49″) HWeight5.56 kg (12.26 lbs.) without dust coverAccessories IncludedDust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge (black), 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3′)), AC adapter (approx. 1.5 m (4.9′)), Dust cover hingesNotesTonearm type: Static balanced straight carbon tonearm Effective arm length: 223.6 mm Overhang: 18.6 mm Tracking error angle: <2 degrees Applicable cartridge weight: 12-17 g Stylus pressure adjustment range: 0-3 g Replacement Stylus: AT-VMN95E BK Additional informationbrandAudio TechnicamodelAT-LPW50PB
Turntables
