SKU: AT-LPW40WN Categories: 'Pricespy, Audio, Turntables Description Additional informationDescriptionAT-LPW40WNThe AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.The turntable includes a straight carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.Includes VM95E CartridgeFEATURES:Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPMThe motor features a speed-sensor system to maintain accurate platter rotation speedFully manual operationAdjustable dynamic anti-skate controlProfessional anti-resonance, die-cast aluminium platter with rubber matAT-HS4 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylusAT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and applicationStraight carbon-fibre tonearm with hydraulically damped lift control and lockable restAnti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneerBuilt-in switchable phono pre-amplifier for phono or line-level outputAC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chainIncludes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust coverSPECIFICATIONS:TurntableTypeBelt-drive manual turntableMotorDC servo with Active Speed StabilizationDrive MethodBelt driveSpeeds33-1/3 RPM, 45 RPMTurntable PlatterDie-cast aluminiumWow and Flutter< 0.15% WRMS (33 RPM) at 3 kHzSignal-to-Noise Ratio>60dBOutput LevelPre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/secPhono Pre-Amp Gain35 dB nominal, RIAA equalizedPower Supply Requirements100-240 V, 50/60 Hz, 0.5 A Max.Dimensions420.0 mm (16.53″) W x 340.0 mm (13.38″) D x 116.9 mm (4.6″) HWeight4.72 kg (10.40 lbs.) without dust coverAccessories IncludedDust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge, 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3′)), AC adapter (approx. 1.5 m (4.9′)) (AD-SA1205WE), Dust cover hingesNotesTonearm type: Static balanced straight carbon tonearm Effective arm length: 223.6 mm Overhang: 18.6 mm Tracking error angle: <2 degrees Applicable cartridge weight: 12-17 g Stylus pressure adjustment range: 0-3 g AC Adapter: 12 V, 0.5 A Replacement Stylus: AT-VMN95E Additional informationbrandAudio TechnicamodelAT-LPW40WNcoloursWalnut
